Mechanical Condition Monitoring

Learn mechanical health monitoring for rotating equipment

Built for reliability engineers and maintenance teams ready to move from reactive to predictive.

80+ pages of content
Vibration to oil analysis
Free reference. No login.

What is Mechanical Condition Monitoring?

Mechanical condition monitoring is the systematic measurement of physical signals: vibration, temperature, ultrasound, and oil chemistry, all measured on rotating machinery to detect developing faults before they cause unplanned failures. A sensor at the bearing housing measures vibration. The signal is processed into a frequency spectrum. Each fault type produces peaks at predictable frequencies. Trend those frequencies over time and you know when a bearing is degrading months before it fails. That window is when you schedule the replacement.

Bearing / Shaft Rotating element Accelerometer Measures vibration signal FFT Spectrum Fault frequencies isolated Fault Detected

Why condition monitoring changes maintenance

Detect faults at Stage 1

Bearing defect frequencies and ultrasound signals appear weeks before the temperature or audible noise stages that signal imminent failure.

Bearing condition monitoring →

Slash emergency repair costs

A planned bearing swap costs 5–10x less than an emergency outage plus collateral shaft, seal, and housing damage.

How to set up monitoring →

Plan shutdowns with confidence

Stage 2 detection typically provides 2–6 months of planning time: enough to order parts, schedule personnel, and choose a maintenance window.

Setting alarm levels →

Extend equipment life with better lubrication

Ultrasound-guided relubrication eliminates over- and under-greasing, the two leading causes of premature bearing failure.

Lubrication monitoring →

Covers every rotating asset

Vibration analysis applies to motors, pumps, fans, compressors, gearboxes, and any machine with rolling element bearings.

Vibration analysis →

Your path from zero to confident professional

Follow the stages in order or jump to where you are.

1
Beginner
Foundations

What condition monitoring is, how vibration analysis works, and the fundamentals of bearing health measurement.

Start with
2
Intermediate
Spectrum Analysis

Reading FFT spectra, calculating bearing defect frequencies, understanding ISO 10816 alarm zones, and acoustic monitoring.

Explore
3
Advanced
Full Program

Continuous vs. route-based programs, advanced multi-fault diagnosis, oil analysis integration, and field balancing.

Dive into

Core concepts, defined plainly

Six terms that explain how condition monitoring actually works.

VA Vibration Analysis

The measurement of oscillation amplitude and frequency at bearing housings to identify fault signatures. Each fault type: imbalance, misalignment, bearing defects, looseness. Each produces peaks at predictable, calculable frequencies.

Vibration Analysis deep dive →
FFT Fast Fourier Transform

The mathematical conversion of a time-domain vibration signal into the frequency domain. Each fault generates vibration at a specific frequency, so FFT separates overlapping faults into individually readable peaks.

FFT Spectrum deep dive →
BFF Bearing Fault Frequencies

BPFO, BPFI, BSF, and FTF are the calculated frequencies at which a bearing defect generates impacts. Calculated from bearing geometry and shaft speed, these are the specific peaks to monitor for amplitude growth.

Bearing Fault Frequencies deep dive →
ISO ISO 10816

The international standard defining vibration severity zones (A through D) for different machine classes. Zone A is new machine acceptance; Zone D requires immediate shutdown. Alarm levels are set relative to these zones.

ISO 10816 deep dive →
P-F P-F Interval

The time between potential failure (first detectable sign) and functional failure (complete loss of function). Bearing monitoring aims to detect degradation at Stage 1 or 2 of this interval, when weeks to months of planning time remain.

P-F Interval deep dive →
OA Oil Analysis

Laboratory or inline measurement of oil degradation, viscosity, contamination, and metallic particle content. The earliest indicator of gearbox and bearing wear, detectable before any vibration change.

Oil Analysis deep dive →

Continuous Mechanical Monitoring for Rotating Assets

Tractian sensors track bearing vibration at defect frequencies continuously. BPFO, BPFI, BSF, and FTF are trended automatically so your team catches faults at Stage 1.

See Mechanical Monitoring

Also explore

Complete the picture with Electrical Monitoring

Mechanical vibration and electrical current signatures work together. MCSA catches rotor bar faults that vibration analysis misses. A complete maintenance program monitors both.

Explore Electrical Monitoring →